Rearrange the code to read the PHY IDs, so we don't call get_phy_id()
only to immediately call get_phy_c45_ids(). Move that logic into
get_phy_device(), which results in better readability.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/net/phy/phy_device.c | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e04284c4ebf8..0d6b6ca66216 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -756,29 +756,18 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
u32 *phy_id,
}
/**
- * get_phy_id - reads the specified addr for its ID.
+ * get_phy_c22_id - reads the specified addr for its clause 22 ID.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
* @phy_id: where to store the ID retrieved.
- * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
- * @c45_ids: where to store the c45 ID information.
- *
- * Description: In the case of a 802.3-c22 PHY, reads the ID registers
- * of the PHY at @addr on the @bus, stores it in @phy_id and returns
- * zero on success.
- *
- * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
- * its return value is in turn returned.
*
+ * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus.
+ * Return the PHY ID read from the PHY in @phy_id on successful access.
*/
-static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
- bool is_c45, struct phy_c45_device_ids *c45_ids)
+static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
int phy_reg;
- if (is_c45)
- return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
-
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
if (phy_reg < 0) {
@@ -817,7 +806,11 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int
addr, bool is_c45)
c45_ids.devices_in_package = 0;
memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
- r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
+ if (is_c45)
+ r = get_phy_c45_ids(bus, addr, &phy_id, &c45_ids);
+ else
+ r = get_phy_c22_id(bus, addr, &phy_id);
+
if (r)
return ERR_PTR(r);
--
2.20.1
