On Sun, 17 May 2020 21:58:44 +0200 Andrew Lunn wrote:
> Some ethernet PHYs allow access to raw TDR data in addition to summary
> diagnostics information. Add support for retrieving this data via
> netlink ethtool. The basic structure in the core is the same as for
> normal phy diagnostics, the PHY driver simply uses different helpers
> to fill the netlink message with different data.
>
> There is a graphical tool under development, as well a ethtool(1)
> which can dump the data as text and JSON.
>
> Thanks for Chris Healy for lots of testing.
Hm, my system can't build this with allmodconfig:
drivers/net/phy/nxp-tja11xx.c:195:37: error: not enough arguments for function
ethnl_cable_test_alloc
drivers/net/phy/nxp-tja11xx.c: In function tja11xx_config_aneg_cable_test:
drivers/net/phy/nxp-tja11xx.c:195:8: error: too few arguments to function
ethnl_cable_test_alloc
195 | ret = ethnl_cable_test_alloc(phydev);
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/net/phy/nxp-tja11xx.c:8:
include/linux/ethtool_netlink.h:30:19: note: declared here
30 | static inline int ethnl_cable_test_alloc(struct phy_device *phydev, u8
cmd)
| ^~~~~~~~~~~~~~~~~~~~~~
make[4]: *** [drivers/net/phy/nxp-tja11xx.o] Error 1
make[3]: *** [drivers/net/phy] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/net] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [drivers] Error 2
make: *** [sub-make] Error 2
