From: DENG Qingfang <[email protected]>
Date: Wed, 13 May 2020 23:10:16 +0800
> When a client moves from a DSA user port to a software port in a bridge,
> it cannot reach any other clients that connected to the DSA user ports.
> That is because SA learning on the CPU port is disabled, so the switch
> ignores the client's frames from the CPU port and still thinks it is at
> the user port.
>
> Fix it by enabling SA learning on the CPU port.
>
> To prevent the switch from learning from flooding frames from the CPU
> port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
> and let the switch flood them instead of trapping to the CPU port.
> Multicast frames still need to be trapped to the CPU port for snooping,
> so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
> to disable SA learning.
>
> Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530
> switch")
> Signed-off-by: DENG Qingfang <[email protected]>
Applied and queued up for -stable, thanks.
