The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we get a chance to have the dedicated Broadcom PHY
driver (CONFIG_BROADCOM_PHY) enabled for this to happen.
Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL
when not needed")
Reported-by: Marek Szyprowski <m.szyprow...@samsung.com>
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
David,
I would like Marek to indicate whether he is okay or not with this
change. Thanks!
drivers/net/ethernet/broadcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/broadcom/Kconfig
b/drivers/net/ethernet/broadcom/Kconfig
index 53055ce5dfd6..8a70b9152f7c 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -69,6 +69,7 @@ config BCMGENET
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select DIMLIB
+ imply BROADCOM_PHY if ARCH_BCM2835
help
This driver supports the built-in Ethernet MACs found in the
Broadcom BCM7xxx Set Top Box family chipset.
--
2.17.1
