The PHY drivers can use these helpers for reporting the results. The
results get translated into netlink attributes which are added to the
pre-allocated skbuf.

Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
 include/linux/ethtool_netlink.h | 13 +++++++++
 include/linux/phy.h             |  4 +++
 net/ethtool/cabletest.c         | 47 +++++++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+)

diff --git a/include/linux/ethtool_netlink.h b/include/linux/ethtool_netlink.h
index 7d763ba22f6f..0d12abbdf3c3 100644
--- a/include/linux/ethtool_netlink.h
+++ b/include/linux/ethtool_netlink.h
@@ -20,6 +20,8 @@ struct phy_device;
 int ethnl_cable_test_alloc(struct phy_device *phydev);
 void ethnl_cable_test_free(struct phy_device *phydev);
 void ethnl_cable_test_finished(struct phy_device *phydev);
+int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u16 result);
+int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm);
 #else
 static inline int ethnl_cable_test_alloc(struct phy_device *phydev)
 {
@@ -33,5 +35,16 @@ static inline void ethnl_cable_test_free(struct phy_device 
*phydev)
 static inline void ethnl_cable_test_finished(struct phy_device *phydev)
 {
 }
+static inline int ethnl_cable_test_result(struct phy_device *phydev, u8 pair,
+                                         u16 result)
+{
+       return -ENOTSUPP;
+}
+
+static inline int ethnl_cable_test_fault_length(struct phy_device *phydev,
+                                               u8 pair, u16 cm)
+{
+       return -ENOTSUPP;
+}
 #endif /* IS_ENABLED(ETHTOOL_NETLINK) */
 #endif /* _LINUX_ETHTOOL_NETLINK_H_ */
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ee69f781995a..856b4293a645 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1229,6 +1229,10 @@ int phy_start_cable_test(struct phy_device *phydev,
 }
 #endif
 
+int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result);
+int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair,
+                               u16 cm);
+
 static inline void phy_device_reset(struct phy_device *phydev, int value)
 {
        mdio_device_reset(&phydev->mdio, value);
diff --git a/net/ethtool/cabletest.c b/net/ethtool/cabletest.c
index 4c888db33ef0..f500454a54eb 100644
--- a/net/ethtool/cabletest.c
+++ b/net/ethtool/cabletest.c
@@ -114,3 +114,50 @@ void ethnl_cable_test_finished(struct phy_device *phydev)
        ethnl_multicast(phydev->skb, phydev->attached_dev);
 }
 EXPORT_SYMBOL_GPL(ethnl_cable_test_finished);
+
+int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u16 result)
+{
+       struct nlattr *nest;
+       int ret = -EMSGSIZE;
+
+       nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TEST_NTF_RESULT);
+       if (!nest)
+               return -EMSGSIZE;
+
+       if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_PAIR, pair))
+               goto err;
+       if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_CODE, result))
+               goto err;
+
+       nla_nest_end(phydev->skb, nest);
+       return 0;
+
+err:
+       nla_nest_cancel(phydev->skb, nest);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_result);
+
+int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
+{
+       struct nlattr *nest;
+       int ret = -EMSGSIZE;
+
+       nest = nla_nest_start(phydev->skb,
+                             ETHTOOL_A_CABLE_TEST_NTF_FAULT_LENGTH);
+       if (!nest)
+               return -EMSGSIZE;
+
+       if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR, pair))
+               goto err;
+       if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_CM, cm))
+               goto err;
+
+       nla_nest_end(phydev->skb, nest);
+       return 0;
+
+err:
+       nla_nest_cancel(phydev->skb, nest);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length);
-- 
2.26.2

Reply via email to