From: Michael Walle <mich...@walle.cc> Date: Mon, 4 May 2020 18:52:28 +0200
> If there is no specific configuration of the felix switch in the device > tree, but only the default configuration (ie. given by the SoCs dtsi > file), the probe fails because no CPU port has been set. On the other > hand you cannot set a default CPU port because that depends on the > actual board using the switch. > > [ 2.701300] DSA: tree 0 has no CPU port > [ 2.705167] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 > [ 2.711844] mscc_felix: probe of 0000:00:00.5 failed with error -22 > > Thus let the device tree disable this device entirely, like it is also > done with the enetc driver of the same SoC. > > Signed-off-by: Michael Walle <mich...@walle.cc> Applied, thank you.
