From: Vadim Pasternak <vad...@mellanox.com>
Extend the size of QSFP EEPROM for the cable types SSF8436 and SFF8636
from 256 to 640 bytes in order to expose all the EEPROM pages by
ethtool.
For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes
of data for ethtool's get_module_eeprom() callback. This is because the
driver uses the below defines to specify SFF module length in ethtool's
get_module_info() callback:
'ETH_MODULE_SFF_8636_LEN' and 'ETH_MODULE_SFF_8436_LEN' (both are 256).
As a result of exposing 256 bytes only, ethtool shows wrong "zero" info
for pages 1, 2, 3.
The patch changes the length returned by callback for get_module_info()
to the values from the next defines: 'ETH_MODULE_SFF_8636_MAX_LEN' and
'ETH_MODULE_SFF_8436_MAX_LEN' (both are 640) to allow exposing of upper
page 1, 2 and 3.
Signed-off-by: Vadim Pasternak <vad...@mellanox.com>
Acked-by: Jiri Pirko <j...@mellanox.com>
Signed-off-by: Ido Schimmel <ido...@mellanox.com>
---
.../net/ethernet/mellanox/mlxsw/core_env.c | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
index d2c7ce67c300..08215fed193d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
@@ -50,6 +50,7 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core,
int module,
char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
char mcia_pl[MLXSW_REG_MCIA_LEN];
u16 i2c_addr;
+ u8 page = 0;
int status;
int err;
@@ -62,11 +63,21 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core
*mlxsw_core, int module,
i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW;
if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) {
- i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH;
- offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH;
+ page = MLXSW_REG_MCIA_PAGE_GET(offset);
+ offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page;
+ /* When reading upper pages 1, 2 and 3 the offset starts at
+ * 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436
+ * specification for graphical depiction.
+ * MCIA register accepts buffer size <= 48. Page of size 128
+ * should be read by chunks of size 48, 48, 32. Align the size
+ * of the last chunk to avoid reading after the end of the
+ * page.
+ */
+ if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH)
+ size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset;
}
- mlxsw_reg_mcia_pack(mcia_pl, module, 0, 0, offset, size, i2c_addr);
+ mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr);
err = mlxsw_reg_query(mlxsw_core, MLXSW_REG(mcia), mcia_pl);
if (err)
@@ -168,7 +179,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core
*mlxsw_core, int module,
switch (module_id) {
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP:
modinfo->type = ETH_MODULE_SFF_8436;
- modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
break;
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_PLUS: /* fall-through */
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP28:
@@ -176,10 +187,10 @@ int mlxsw_env_get_module_info(struct mlxsw_core
*mlxsw_core, int module,
module_rev_id >=
MLXSW_REG_MCIA_EEPROM_MODULE_INFO_REV_ID_8636) {
modinfo->type = ETH_MODULE_SFF_8636;
- modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8436;
- modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
}
break;
case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_SFP:
--
2.21.0
