This series adds support for the 2.5Gbps chip RTl8125. It can be found on PCIe network cards, and on an increasing number of consumer gaming mainboards. Series is partially based on the r8125 vendor driver. Tested with a Delock 89531 PCIe card against a Netgear GS110MX Multi-Gig switch. Firmware isn't strictly needed, but on some systems there may be compatibility issues w/o firmware. Firmware has been submitted to linux-firmware.
v2: - split first patch into 6 smaller ones to facilitate bisecting Heiner Kallweit (9): r8169: change interrupt mask type to u32 r8169: restrict rtl_is_8168evl_up to RTL8168 chip versions r8169: factor out reading MAC address from registers r8169: move disabling interrupt coalescing to RTL8169/RTL8168 init r8169: read common register for PCI commit r8169: don't use bit LastFrag in tx descriptor after send r8169: add support for RTL8125 r8169: add RTL8125 PHY initialization r8169: add support for EEE on RTL8125 drivers/net/ethernet/realtek/Kconfig | 9 +- drivers/net/ethernet/realtek/r8169_main.c | 464 ++++++++++++++++++++-- 2 files changed, 443 insertions(+), 30 deletions(-) -- 2.23.0
