From: Marek Behún <marek.be...@nic.cz> Date: Mon, 26 Aug 2019 23:31:49 +0200
> this is the fifth version of changes for the Topaz/Peridot family of > switches. The patches apply on net-next. > Changes since v4: > - added Reviewed-by and Tested-by tags on first 2 patches, the others > are changed are affected by changes in patch 3/6, so I did not add > the tags, except for 5/6, which is just macro renaming > - patch 3 was changed: the serdes_get_lane returns 0 on success (lane > was discovered), -ENODEV if not lane is present on the port, and > other error if other error occured. Lane is put into a pointer of > type u8 > - patches 4 and 6 were affected by this (error detecting from > serdes_get_lane) > - Andrew's complaint about the two additional parameters > (allow_over_2500 and make_cmode_writable) was addressed, by Vivien's > advice: I put a new method into chip operations structure, named > port_set_cmode_writable. This is called from mv88e6xxx_port_setup_mac > just before port_set_cmode. The method is implemented for Topaz. > The check if cmodes over 2500 should be allowed on given port is now > done in the specific port_set_cmode() that requires it, thus the > allow_over_2500 argument is not needed > > Again, tested on Turris Mox with Peridot, Topaz, and Peridot + Topaz. Series applied, thank you.
