On 27.08.2019 04:47, Jian Shen wrote:
> Some ethernet drivers may call phy_start() and phy_stop() from
> ndo_open and ndo_close() respectively.
>
> When network cable is unconnected, and operate like below:
> step 1: ifconfig ethX up -> ndo_open -> phy_start ->start
> autoneg, and phy is no link.
> step 2: ifconfig ethX down -> ndo_close -> phy_stop -> just stop
> phy state machine.
> step 3: plugin the network cable, and autoneg complete, then
> LED for link status will be on.
> step 4: ethtool ethX --> see the result of "Link detected" is no.
>
Step 3 and 4 seem to be unrelated to the actual issue.
With which MAC + PHY driver did you observe this?
> This patch forces phy suspend even phydev->link is off.
>
> Signed-off-by: Jian Shen <shenjia...@huawei.com>
> ---
> drivers/net/phy/phy.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index f3adea9..0acd5b4 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -911,8 +911,8 @@ void phy_state_machine(struct work_struct *work)
> if (phydev->link) {
> phydev->link = 0;
> phy_link_down(phydev, true);
> - do_suspend = true;
> }
> + do_suspend = true;
> break;
> }
>
>
Heiner
