On 8/25/2019 12:13 AM, Marek Behun wrote:
> On Sat, 24 Aug 2019 13:04:04 -0700
> Florian Fainelli <f.faine...@gmail.com> wrote:
>
>> Now, the 4.9 kernel behavior actually works just fine because eth1 is
>> not a special interface, so no tagging is expected, and "wifi", although
>> it supports DSA tagging, represents another side of the CPU/host network
>> stack, so you never have to inject frames into the switch, because you
>> can use eth1 to do that and let MAC learning do its job to forward to
>> the correct port of the switch.
>
> Hi Florian,
>
> Sorry, I am having trouble understanding what you mean in the
> paragraph I quoted above (and paragraphs afterwards).
>
> eth0 and eth1 are interfaces created by an ethernet driver.
> wlan0 is an interface created by wireless driver.
> wifi is a slave interface created by DSA for port 5 on the switch.
> eth1 is DSA slave or a DSA master connected to port 5?
"wifi" is a DSA slave network interface, and as you understood, eth1 is
a standard Ethernet driver (which happens to be the same as eth0, since
on that system there are two identical controllers, driver is
bcmsysport.c). The relevant part of the DTS for that system looks like this:
port@5 {
reg = <5>;
label = "wifi";
ethernet = <&enet_1>;
};
port@8 {
reg = <8>;
label = "cpu";
ethernet = <&enet_0>;
};
So as you can see, the devices are all described correctly, simply the
behavior on the Linux change changes whether you have commit
6d4e5c570c2d66c806ecc6bd851fcf881fe8a38e ("net: dsa: get port type at
parse time") included or not. With this commit, the criteria for
determining what is a DSA/CPU port changed: it used to be based on the
label (e.g.: "cpu", "dsa") and then it changed to be based on whether a
phandle property is either "ethernet" (port is CPU) or "link" (port is
DSA), which is the right thing to do, but it no longer allows us to be
specific about which port is going to be elected as the CPU port.
Fortunately the switch driver is coded with the assumption that either
port 5 or 8 could be used.
Note that when we do not have a network device that represents the
switch"side (e.g.: the CPU port or the DSA port), we had to jump through
many hoops in order to make some information visible to the user, or
even overlay specific operations onto the DSA master, that code is under
net/dsa/master.c.
>
> How does DSA handle two interfaces with same reg property?
This is not happening, see DTS example above.
--
Florian
