Hi Frank,
Quoting Frank Wunderlich <[email protected]>:
tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367)
Thanks for testing!
as reported to rene directly rx-path needs some rework because
current rx-speed
on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec
I still think it is a result of the extra code in the rx path when mt76x8
was introduced.
Greats,
René
Tested-by: Frank Wunderlich <[email protected]>
regards Frank
Gesendet: Freitag, 23. August 2019 um 15:45 Uhr
Von: "René van Dorst" <[email protected]>
An: "John Crispin" <[email protected]>, "Sean Wang"
<[email protected]>, "Nelson Chang"
<[email protected]>, "David S . Miller"
<[email protected]>, "Matthias Brugger" <[email protected]>
Cc: [email protected], [email protected],
[email protected], [email protected],
"Russell King" <[email protected]>, "Frank Wunderlich"
<[email protected]>, "Stefan Roese" <[email protected]>, "René van
Dorst" <[email protected]>
Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK
These patches converts mediatek driver to PHYLINK API.
v2->v3:
* Phylink improvements and clean-ups after review
v1->v2:
* Rebase for mt76x8 changes
* Phylink improvements and clean-ups after review
* SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode.
Refactor the code.
René van Dorst (3):
net: ethernet: mediatek: Add basic PHYLINK support
net: ethernet: mediatek: Re-add support SGMII
dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the
new phylink API
.../arm/mediatek/mediatek,sgmiisys.txt | 2 -
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +-
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 -
drivers/net/ethernet/mediatek/Kconfig | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +--
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++-
drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++-
8 files changed, 477 insertions(+), 293 deletions(-)
--
2.20.1
