When a VLAN is programmed on a user port, every switch of the fabric also
program the CPU ports and the DSA links as part of the VLAN. To do that,
DSA makes use of bitmaps to prepare all members of a VLAN.
While this is expected for DSA links which are used as conduit between
interconnected switches, only the dedicated CPU port of the slave must be
programmed, not all CPU ports of the fabric. This may also cause problems in
other corners of DSA such as the tag_8021q.c driver, which needs to program
its ports manually, CPU port included.
We need the dsa_port_vlan_{add,del} functions and its dsa_port_vid_{add,del}
variants to simply trigger the VLAN programmation without any logic in them,
but they may currently skip the operation based on the bridge device state.
This patchset gets rid of the bitmap operations, and moves the bridge device
check as well as the explicit programmation of CPU ports where they belong,
in the slave code.
While at it, clear the VLAN flags before programming a CPU port, as it
doesn't make sense to forward the PVID flag for example for such ports.
Vivien Didelot (6):
net: dsa: remove bitmap operations
net: dsa: do not skip -EOPNOTSUPP in dsa_port_vid_add
net: dsa: add slave VLAN helpers
net: dsa: check bridge VLAN in slave operations
net: dsa: program VLAN on CPU port from slave
net: dsa: clear VLAN flags for CPU port
include/net/dsa.h | 3 --
net/dsa/dsa2.c | 14 -----
net/dsa/port.c | 14 ++---
net/dsa/slave.c | 79 +++++++++++++++++++++++----
net/dsa/switch.c | 135 +++++++++++++++++++++-------------------------
5 files changed, 136 insertions(+), 109 deletions(-)
--
2.23.0
