[PATCH] can: flexcan: disable completely the ECC mechanism

[Joakim Zhang]

The ECC(memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit,
not just mask the related interrupts.

Fixes:cdce844865be("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zh...@nxp.com>
---
 drivers/net/can/flexcan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index def8cbbc04e8..6a48333b40c7 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1428,6 +1428,7 @@ static int flexcan_chip_start(struct net_device *dev)
                reg_mecr = priv->read(&regs->mecr);
                reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
                priv->write(reg_mecr, &regs->mecr);
+               reg_mecr |= FLEXCAN_MECR_ECCDIS;
                reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
                              FLEXCAN_MECR_FANCEI_MSK);
                priv->write(reg_mecr, &regs->mecr);
-- 
2.17.1