> Konstantin >> On 7/29/19 6:19 AM, FIXED-TERM Buecheler Konstantin (ETAS-SEC/ECT-Mu) wrote: >> Hi all, >> >> I am currently working on a project where I am trying to use the tcan4550 >> chip with a Raspberry PI 3B. >> I am struggling to create a working device tree overlay file for the >> Raspberry Pi. >> Has anyone here tried this already? I would appreciate any help.
> Are you using the driver from net-next? > https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/tree/drivers/net/can/m_can Yes, I am using the driver from net-next. > DT documentation here > https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/tree/Documentation/devicetree/bindings/net/can/tcan4x5x.txt I saw this documentation but it didn’t help much (As I said, I don’t have much experience with device trees) . My dts file currently looks like this: /dts-v1/; /plugin/; / { compatible = "brcm,bcm2835", "brcm,bcm2836", "brcm,bcm2708", "brcm,bcm2709"; fragment@0 { target = <&spi0>; __overlay__ { status = "okay"; spidev@0{ status = "disabled"; }; }; }; fragment@2 { compatible = "bosch, m_can"; target = <&spi0>; __overlay__ { tcan4x5x: tcan4x5x@0 { compatible = "ti,tcan4x5x"; reg = <0>; #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; data-ready-gpios = <&gpio 23 0>; device-wake-gpios = <&gpio 24 1>; }; }; }; }; Checking dmesg I always see these errors: [ 5.409051] tcan4x5x spi0.0: no clock found [ 5.409064] tcan4x5x spi0.0: no CAN clock source defined [ 5.409125] tcan4x5x spi0.0: data-ready gpio not defined [ 5.409135] tcan4x5x spi0.0: Probe failed, err=-22 I already fixed the clock issue once by doing something like this: clocks = <&can0_osc>, <&can0_osc>; clock-names = "hclk", "cclk"; But that didn’t fix the " data-ready gpio not defined" error. > I did the development on a BeagleBone Black. > Dan > Thanks, > Konstantin >
