On Thu, 2007-02-01 at 12:04 +0100, Jens Osterkamp wrote: > Ishizaki-san, > > > This patch partially works on celleb but remains > > following several problems. > > 1. It doesn't recover once an ethernet cable which is > > connected to a spider_net card is unpluged. > > My understanding is that you are using the LINK interrupt to detect this. > For the blade this is not connected but reenabling it wont hurt, I hope.
I would suggest just polling from a delayed work or a timer like sungem does. > I still dont see why you need different settings for different speed switches. > This is getting to a point where access to some hardware would be handy. > What exact phy are using anyway ? Yeah, same question... > > Furthermore, we have a problem that poll_link() may succeed even when > > the auto-neg initial setting is for different network switch type, > > and the network card does not work on this case. We retry auto-neg > > with the another initial setting on this case. > > See above, could you give some more details why this is the case. Or maybe Ben > knows more about this ? No, I'm surprised too. Ben. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html