Adding support for port 5.
Port 5 ca muxed/interface to:
- internal 5th GMAC of the switch; can be used as 2nd CPU port or as
extra port with an external phy for a 6th ethernet port.
- internal PHY of port 0 or 4; Used in most applications so that port 0
or 4 is the WAN port and interfaces with the 2nd GMAC of the SOC.
Signed-off-by: René van Dorst <opensou...@vdorst.com>
---
drivers/net/dsa/mt7530.c | 135 +++++++++++++++++++++++++++++++++++++--
drivers/net/dsa/mt7530.h | 28 ++++++++
2 files changed, 159 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9c5e4dd00826..838a921ca83e 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -633,6 +633,74 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int
sset)
return ARRAY_SIZE(mt7530_mib);
}
+static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t
interface)
+{
+ struct mt7530_priv *priv = ds->priv;
+ u8 tx_delay = 0;
+ int val;
+
+ mutex_lock(&priv->reg_mutex);
+
+ val = mt7530_read(priv, MT7530_MHWTRAP);
+
+ val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
+ val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
+
+ switch (priv->p5_mode) {
+ case P5_MODE_GPHY_P0:
+ /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
+ val |= MHWTRAP_PHY0_SEL;
+ /* fall through */
+ case P5_MODE_GPHY_P4:
+ /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
+ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
+
+ /* Setup the MAC by default for the cpu port */
+ mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
+ break;
+ case P5_MODE_GMAC:
+ /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
+ val &= ~MHWTRAP_P5_DIS;
+ break;
+ case P5_MODE_DISABLED:
+ interface = PHY_INTERFACE_MODE_NA;
+ break;
+ default:
+ dev_err(ds->dev, "Unsupported p5_mode %d\n", priv->p5_mode);
+ goto unlock_exit;
+ }
+
+ /* Setup RGMII settings */
+ if (phy_interface_mode_is_rgmii(interface)) {
+ val |= MHWTRAP_P5_RGMII_MODE;
+
+ /* P5 RGMII RX Clock Control: delay setting for 1000M */
+ mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
+
+ /* Don't set delay in DSA mode */
+ if (!dsa_is_dsa_port(priv->ds, 5) &&
+ (interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+ interface == PHY_INTERFACE_MODE_RGMII_ID))
+ tx_delay = 4; /* n * 0.5 ns */
+
+ /* P5 RGMII TX Clock Control: delay x */
+ mt7530_write(priv, MT7530_P5RGMIITXCR,
+ CSR_RGMII_TXC_CFG(0x10 + tx_delay));
+
+ /* reduce P5 RGMII Tx driving, 8mA */
+ mt7530_write(priv, MT7530_IO_DRV_CR,
+ P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
+ }
+
+ mt7530_write(priv, MT7530_MHWTRAP, val);
+
+ dev_info(ds->dev, "Setup P5, HWTRAP=0x%x, port-mode=%s, phy-mode=%s\n",
+ val, p5_modes(priv->p5_mode), phy_modes(interface));
+
+unlock_exit:
+ mutex_unlock(&priv->reg_mutex);
+}
+
static int
mt7530_cpu_port_enable(struct mt7530_priv *priv,
int port)
@@ -1173,6 +1241,10 @@ mt7530_setup(struct dsa_switch *ds)
u32 id, val;
struct device_node *dn;
struct mt7530_dummy_poll p;
+ phy_interface_t interface;
+ struct device_node *mac_np;
+ struct device_node *phy_node;
+ const __be32 *_id;
/* The parent node of master netdev which holds the common system
* controller also is the container for two GMACs nodes representing
@@ -1258,6 +1330,40 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_port_disable(ds, i);
}
+ /* Setup port 5 */
+ priv->p5_mode = P5_MODE_DISABLED;
+ interface = PHY_INTERFACE_MODE_NA;
+
+ if (!dsa_is_unused_port(ds, 5)) {
+ priv->p5_mode = P5_MODE_GMAC;
+ interface = of_get_phy_mode(ds->ports[5].dn);
+ } else {
+ /* Scan the ethernet nodes. Look for GMAC1, Lookup used phy */
+ for_each_child_of_node(dn, mac_np) {
+ if (!of_device_is_compatible(mac_np,
+ "mediatek,eth-mac"))
+ continue;
+ _id = of_get_property(mac_np, "reg", NULL);
+ if (be32_to_cpup(_id) != 1)
+ continue;
+
+ interface = of_get_phy_mode(mac_np);
+ phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
+
+ if (phy_node->parent == priv->dev->of_node->parent) {
+ _id = of_get_property(phy_node, "reg", NULL);
+ id = be32_to_cpup(_id);
+ if (id == 0)
+ priv->p5_mode = P5_MODE_GPHY_P0;
+ if (id == 4)
+ priv->p5_mode = P5_MODE_GPHY_P4;
+ }
+ break;
+ }
+ }
+
+ mt7530_setup_port5(ds, interface);
+
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
@@ -1283,7 +1389,20 @@ static void mt7530_phylink_mac_config(struct dsa_switch
*ds, int port,
if (state->interface != PHY_INTERFACE_MODE_GMII)
goto unsupported;
break;
- /* case 5: Port 5 is not supported! */
+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII)
+ goto unsupported;
+ if (priv->p5_mode != P5_MODE_GMAC) {
+ priv->p5_mode = P5_MODE_GMAC;
+ mt7530_port_disable(ds, port);
+ mt7530_setup_port5(ds, state->interface);
+ mt7530_port_enable(ds, port, NULL);
+ }
+ /* We are connected to external phy */
+ if (dsa_is_user_port(ds, 5))
+ mcr |= PMCR_EXT_PHY;
+ break;
case 6: /* 1st cpu port */
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
state->interface != PHY_INTERFACE_MODE_TRGMII)
@@ -1364,7 +1483,12 @@ static void mt7530_phylink_validate(struct dsa_switch
*ds, int port,
state->interface != PHY_INTERFACE_MODE_GMII)
goto unsupported;
break;
- /* case 5: Port 5 not supported! */
+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_NA)
+ goto unsupported;
+ break;
case 6: /* 1st cpu port */
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
state->interface != PHY_INTERFACE_MODE_TRGMII)
@@ -1385,8 +1509,11 @@ static void mt7530_phylink_validate(struct dsa_switch
*ds, int port,
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseT_Half);
+
+ if (state->interface != PHY_INTERFACE_MODE_MII) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
linkmode_and(supported, supported, mask);
linkmode_and(state->advertising, state->advertising, mask);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 41d9a132ac70..f2a84ef48548 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -186,6 +186,7 @@ enum mt7530_vlan_port_attr {
/* Register for port MAC control register */
#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
+#define PMCR_EXT_PHY BIT(17)
#define PMCR_MAC_MODE BIT(16)
#define PMCR_FORCE_MODE BIT(15)
#define PMCR_TX_EN BIT(14)
@@ -260,6 +261,7 @@ enum mt7530_vlan_port_attr {
/* Register for hw trap modification */
#define MT7530_MHWTRAP 0x7804
+#define MHWTRAP_PHY0_SEL BIT(20)
#define MHWTRAP_MANUAL BIT(16)
#define MHWTRAP_P5_MAC_SEL BIT(13)
#define MHWTRAP_P6_DIS BIT(8)
@@ -417,6 +419,30 @@ struct mt7530_port {
u16 pvid;
};
+/* Port 5 Mode definitions */
+enum p5_mode {
+ P5_MODE_DISABLED = 0,
+ P5_MODE_GPHY_P0,
+ P5_MODE_GPHY_P4,
+ P5_MODE_GMAC,
+};
+
+static const char *p5_modes(unsigned int p5_mode)
+{
+ switch (p5_mode) {
+ case P5_MODE_DISABLED:
+ return "DISABLED";
+ case P5_MODE_GPHY_P0:
+ return "PHY P0";
+ case P5_MODE_GPHY_P4:
+ return "PHY P4";
+ case P5_MODE_GMAC:
+ return "GMAC";
+ default:
+ return "unknown";
+ }
+}
+
/* struct mt7530_priv - This is the main data structure for holding the
state
* of the driver
* @dev: The device pointer
@@ -432,6 +458,7 @@ struct mt7530_port {
* @ports: Holding the state among ports
* @reg_mutex: The lock for protecting among process accessing
* registers
+ * @p5_mode: PORT 5 mode status
*/
struct mt7530_priv {
struct device *dev;
@@ -444,6 +471,7 @@ struct mt7530_priv {
struct gpio_desc *reset;
unsigned int id;
bool mcm;
+ unsigned int p5_mode;
struct mt7530_port ports[MT7530_NUM_PORTS];
/* protect among processes for registers access*/
--
2.20.1
