Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register().
Signed-off-by: Marek Vasut <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Tristram Ha <[email protected]> Cc: Woojung Huh <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> --- V2: use _cansleep in .remove as well --- drivers/net/dsa/microchip/ksz_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 4f6648d5ac8b..978c59aa8efb 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -436,9 +436,9 @@ int ksz_switch_register(struct ksz_device *dev, return PTR_ERR(dev->reset_gpio); if (dev->reset_gpio) { - gpiod_set_value(dev->reset_gpio, 1); + gpiod_set_value_cansleep(dev->reset_gpio, 1); mdelay(10); - gpiod_set_value(dev->reset_gpio, 0); + gpiod_set_value_cansleep(dev->reset_gpio, 0); } mutex_init(&dev->dev_mutex); @@ -489,7 +489,7 @@ void ksz_switch_remove(struct ksz_device *dev) dsa_unregister_switch(dev->ds); if (dev->reset_gpio) - gpiod_set_value(dev->reset_gpio, 1); + gpiod_set_value_cansleep(dev->reset_gpio, 1); } EXPORT_SYMBOL(ksz_switch_remove); -- 2.20.1
