This patch series adds:
- FDB switchdev support for the second generation of switches (P/Q/R/S).
I could test/code these now that I got a board with a SJA1105Q.
- Management route support for SJA1105 P/Q/R/S. This is needed to send
PTP/STP/management frames over the CPU port.
- Logic to hide private DSA VLANs from the 'bridge fdb' commands.
The new FDB code was also tested and still works on SJA1105T.
Vladimir Oltean (11):
net: dsa: sja1105: Shim declaration of struct sja1105_dyn_cmd
net: dsa: sja1105: Fix bit offsets of index field from L2 lookup
entries
net: dsa: sja1105: Add missing L2 Forwarding Table definitions for
P/Q/R/S
net: dsa: sja1105: Plug in support for TCAM searches via the dynamic
interface
net: dsa: sja1105: Make room for P/Q/R/S FDB operations
net: dsa: sja1105: Add P/Q/R/S support for dynamic L2 lookup
operations
net: dsa: sja1105: Make dynamic_config_read return -ENOENT if not
found
net: dsa: sja1105: Add P/Q/R/S management route support via dynamic
interface
net: dsa: sja1105: Add FDB operations for P/Q/R/S series
net: dsa: sja1105: Unset port from forwarding mask unconditionally on
fdb_del
net: dsa: sja1105: Hide the dsa_8021q VLANs from the bridge fdb
command
drivers/net/dsa/sja1105/sja1105.h | 20 +-
.../net/dsa/sja1105/sja1105_dynamic_config.c | 144 +++++++++++++-
.../net/dsa/sja1105/sja1105_dynamic_config.h | 11 +-
drivers/net/dsa/sja1105/sja1105_main.c | 186 ++++++++++++++++--
drivers/net/dsa/sja1105/sja1105_spi.c | 12 ++
.../net/dsa/sja1105/sja1105_static_config.c | 18 +-
.../net/dsa/sja1105/sja1105_static_config.h | 26 +++
7 files changed, 379 insertions(+), 38 deletions(-)
--
2.17.1
