The PCI-E modifications to bcm43xx do not set up the interrupt vector
correctly. Tested with BCM4311 (PCI-E) on x86_64 and BCM4306 (PCI) on i386.

Signed-off-by: Larry Finger <[EMAIL PROTECTED]>
---

John,

This fix should be applied to wireless-2.6 _AND_ pushed upstream to
2.6.20-rcX. Without this patch, none of the PCI-E interfaces will work.
This version incorporates Michael Buesch's comments, and forgoes some
code clean-ups that were in the first version/

Larry


Index: linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ linux-2.6/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -2704,8 +2704,8 @@ static int bcm43xx_probe_cores(struct bc
                sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
 
                /* extract core_id, core_rev, core_vendor */
-               core_id = (sb_id_hi & 0xFFF0) >> 4;
-               core_rev = (sb_id_hi & 0xF);
+               core_id = (sb_id_hi & 0x8FF0) >> 4;
+               core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
                core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
 
                dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 
0x%x\n",
@@ -2876,7 +2876,10 @@ static int bcm43xx_wireless_core_init(st
                sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
                sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
                sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
-               sbimconfiglow |= 0x32;
+               if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
+                       sbimconfiglow |= 0x32;
+               else
+                       sbimconfiglow |= 0x53;
                bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
        }
 
@@ -3080,7 +3083,7 @@ static int bcm43xx_setup_backplane_pci_c
        if (err)
                goto out;
 
-       if (bcm->current_core->rev < 6 ||
+       if (bcm->current_core->rev < 6 &&
                bcm->current_core->id == BCM43xx_COREID_PCI) {
                value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
                value |= (1 << backplane_flag_nr);

---
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to