Add properties to support all Phy config
PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config.
Signed-off-by: Christophe Roullier <christophe.roull...@st.com>
---
Documentation/devicetree/bindings/net/stm32-dwmac.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index 1341012..3524e80 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -24,9 +24,9 @@ Required properties:
encompases the glue register, and the offset of the control
register.
Optional properties:
-- clock-names: For MPU family "mac-clk-ck" for PHY without quartz
-- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need
to be clock
- by RCC
+- clock-names: For MPU family "eth-ck" for PHY without quartz
+- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to
select RCC clock instead of ETH_CLK125.
+- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have
PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
Example:
--
2.7.4
