On Fri, Mar 01, 2019 at 12:15:31AM -0800, Jeff Kirsher wrote: > From: Nicholas Nunley <nicholas.d.nun...@intel.com> > > This patch adds the ability to configure the coalesce settings from > do_scoalesce on a per-queue basis. > > For each masked queue the current settings are read, modified, and written > back to the kernel. > > Example: > > $ sudo ./ethtool --per-queue eth5 queue_mask 0x1 --coalesce > rx-usecs 10 tx-usecs 5 > $ sudo ./ethtool --per-queue eth5 queue_mask 0x1 --show-coalesce > > Queue: 0 > Adaptive RX: on TX: on > stats-block-usecs: 0 > sample-interval: 0 > pkt-rate-low: 0 > pkt-rate-high: 0 > > rx-usecs: 10 > rx-frames: 0 > rx-usecs-irq: 0 > rx-frames-irq: 256 > > tx-usecs: 5 > tx-frames: 0 > tx-usecs-irq: 0 > tx-frames-irq: 256 > > rx-usecs-low: 0 > rx-frame-low: 0 > tx-usecs-low: 0 > tx-frame-low: 0 > > rx-usecs-high: 0 > rx-frame-high: 0 > tx-usecs-high: 0 > tx-frame-high: 0 > > Based on patch by Kan Liang <kan.li...@intel.com> > > Signed-off-by: Nicholas Nunley <nicholas.d.nun...@intel.com>
Reviewed-by: Michal Kubecek <mkube...@suse.cz>
