From: Kavya Sree Kotagiri <kavyasree.kotag...@microchip.com>
When Ocelot phy-mode is QSGMII, all 4 ports involved in
QSGMII shall be kept out of reset and
Tx lanes shall be enabled to pass the data.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Kavya Sree Kotagiri <kavyasree.kotag...@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegel...@microchip.com>
Co-developed-by: Steen Hegelund <steen.hegel...@microchip.com>
---
drivers/net/ethernet/mscc/ocelot_board.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot_board.c
b/drivers/net/ethernet/mscc/ocelot_board.c
index ca3ea2f..80d8779 100644
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -267,6 +267,7 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
struct phy *serdes;
void __iomem *regs;
char res_name[8];
+ int phy_mode;
u32 port;
if (of_property_read_u32(portnp, "reg", &port))
@@ -292,11 +293,11 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
if (err)
return err;
- err = of_get_phy_mode(portnp);
- if (err < 0)
+ phy_mode = of_get_phy_mode(portnp);
+ if (phy_mode < 0)
ocelot->ports[port]->phy_mode = PHY_INTERFACE_MODE_NA;
else
- ocelot->ports[port]->phy_mode = err;
+ ocelot->ports[port]->phy_mode = phy_mode;
switch (ocelot->ports[port]->phy_mode) {
case PHY_INTERFACE_MODE_NA:
@@ -304,6 +305,13 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
case PHY_INTERFACE_MODE_SGMII:
break;
case PHY_INTERFACE_MODE_QSGMII:
+ /* Ensure clock signals and speed is set on all
+ * QSGMII links
+ */
+ ocelot_port_writel(ocelot->ports[port],
+ DEV_CLOCK_CFG_LINK_SPEED
+ (OCELOT_SPEED_1000),
+ DEV_CLOCK_CFG);
break;
default:
dev_err(ocelot->dev,
--
1.9.1
