On Fri, Feb 22, 2019 at 09:28:04AM +0100, Christophe Roullier wrote: > Add properties to support all Phy config > PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), > PHY wo crystal (50Mhz), No 125Mhz from PHY config. > > Signed-off-by: Christophe Roullier <christophe.roull...@st.com> > --- > Documentation/devicetree/bindings/net/stm32-dwmac.txt | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt > b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > index 1341012..f42dc68 100644 > --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt > @@ -24,9 +24,9 @@ Required properties: > encompases the glue register, and the offset of the control > register. > > Optional properties: > -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz > -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and > need to be clock > - by RCC
You can't just remove properties. > +- clock-names: For MPU family "eth-ck" for PHY without quartz > +- st,eth_clk_sel (boolean) : set this property in RGMII PHY when you do not > want use 125Mhz > +- st,eth_ref_clk_sel (boolean) : set this property in RMII mode when you > have PHY without crystal 50MHz s/_/-/ 'sel' I assume is short for select, but the naming here and description don't really tell me what I'm getting. Rob
