On Fri, Feb 22, 2019 at 05:04:19PM +0200, Claudiu Manoil wrote:
> Define connection bindings (external PHY connections and internal links)
> for the ENETC on-chip ethernet controllers.
>
> Signed-off-by: Claudiu Manoil <claudiu.man...@nxp.com>
> ---
> v3 - added this patch to the set
>
> .../devicetree/bindings/net/fsl-enetc.txt | 109
> +++++++++++++++++++++
> 1 file changed, 109 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/fsl-enetc.txt
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt
> b/Documentation/devicetree/bindings/net/fsl-enetc.txt
> new file mode 100644
> index 0000000..2fbb998
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
> @@ -0,0 +1,109 @@
> +* ENETC ethernet nodes - external connection bindings
> +
> +The ENETC ethernet controllers are PCIe integrated endpoints
> +(IEPs), on-chip devices discoverable as standard PCIe endpoints,
> +integrated into Freescale SoCs. The ENETC devices are self
> +contained, the information needed for device initialization
> +is available in hardware (PCIe ECAM area). However, depending
> +on board design, their external connections are configurable.
> +As usual for SoCs, device tree nodes may be used to define these
> +external connections. The rest of the document specifies how
> +external connections for ENETC ethernet controllers may be
> +defined via device tree nodes.
> +
> +Silicon (SoC) availability (<SoC name>: <SoC DT path/name>)
> + - LS1028A: [arch/arm64] [...]freescale/fsl-ls1028a.dtsi
This doesn't belong in bindings.
> +
> +
> +* ENETC nodes
> +
> +Defined in the SoC device tree as "pci" child nodes of the
> +"pci-host-ecam-generic" compatible "pcie" parent node also known
> +as the Integrated Endpoint Root Complex (IERC) SoC node.
The host controller attachment is also outside the scope of this
binding.
> +
> +Structure - example (LS1028A):
> +
> + pcie@1f0000000 {
> + compatible = "pci-host-ecam-generic";
> + device_type = "pci";
> + ...
> + enetc_port0: pci@0,0 {
The node name 'pci' is reserved for bridges. This should match the
device class if possible (ethernet).
> + reg = <0x000000 0 0 0 0>;
> + };
> + enetc_port1: pci@0,1 {
> + reg = <0x000100 0 0 0 0>;
> + };
> + ...
> + }
> +
> +Each ENETC node has a device number and a function number (expressed
> +by its "reg" property and pci node name, i.e. "pci@0,1" represents
> +device number 0 and functions number 1). Only the standard pci "reg"
> +property is needed here.
There should be a compatible too.
> +For easy reference, each ENETC node is tagged by a handle having the
> +following format:
> +
> + "enetc_port<idx>" where, idx = 0 .. n-1;
> + n - #of available ENETC nodes (Ports) on
> + the given SoC.
These are just source labels, so really they can be anything.
> +
> +NOTES
> +i. The SoC H/W Reference Manual provides a mapping of the ENETC Port
> +numbers to the PCIe Device Number/ Function Number.
> +Example (LS1028):
> + All ENETC PFs (PCIe Physical Functions) have Device Number 0.
> + Port 0 - PF0 (pci@0,0)
> + Port 1 - PF1 (pci@0,1)
> + Port 2 - PF2 (pci@0,2)
> + Port 3 - PF6 (pci@0,6)
> +
> +ii. The SoC H/W Reference Manual also defines which ENETC Ports may have
> +external connections (external ports) and which ones are internally
> +connected to a on-chip L2 switch for instance (internal ports).
> +
> +
> +* Defining connections for ENETC nodes
> +
> +To define external connections for the external ENETC Ports on a given
> +board/platform, the board device tree should include the SoC device tree
> +and reference the external ports by their "enetc_port<idx>" handle.
SoC vs. board files are convention, but not really part of the binding
ABI.
> +
> +Following cases arise, defining all possible connection bindings:
> +
> +1) The ENETC Port is connected to a MDIO configurable PHY:
> +
> + In this case, the ENETC node should include a "mdio" sub-node
> + that in turn should contain the "phy" node describing the
> + external phy. ENETC Port node structure (example):
> +
> + &enetc_port0 {
Please just show the full DT example, not separate chunks.
> + phy-handle = <&sgmii_phy0>;
> + phy-connection-type = "sgmii";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + sgmii_phy0: ethernet-phy@2 {
> + reg = <0x2>;
> + };
> + };
> + };
> +
> + All properties are mandatory for this case, their bindings already
> + defined (see ethernet.txt and phy.txt).
> +
> +2) The ENETC Port has a fixed-link connection:
> +
> + In this case, the ENETC Port node defines a fixed link connection,
> + with the following structure (example):
> +
> + &enetc_port2 {
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> +
> + The "fixed-link" node properties are standard (as defined in
> + fixed-link.txt).
> + This connection type also applies to the internal ENETC Ports.
> --
> 2.7.4
>
