On 1/31/19 7:58 AM, Joakim Zhang wrote: > From: Dong Aisheng <aisheng.d...@nxp.com> > > Current we can meet timeout issue when setting a small bitrate > like 10000 as follows: > root@imx6qdlsolo:~# ip link set can0 up type can bitrate 10000 > A link change request failed with some changes committed already. > Interface can0 may have been left with an inconsistent configuration, > please check. > RTNETLINK answers: Connection timed out
Which SoC are you using? Which clock rate has the flexcan IP core? > It is caused by calling of flexcan_chip_unfreeze() timeout. > > Originally the code is using usleep_range(10, 20) for unfreeze operation, > but the patch (8badd65 can: flexcan: avoid calling usleep_range from > interrupt context) changed it into udelay(10) which is only a half delay > of before, there're also some other delay changes. > > After only changed unfreeze delay back to udelay(20), the issue is gone. > So other timeout values are kept the same as 8badd65 changed. Can you change FLEXCAN_TIMEOUT_US instead? > Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com> > Signed-off-by: Joakim Zhang <qiangqing.zh...@nxp.com> > --- > drivers/net/can/flexcan.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c > index 2bca867bcfaa..1d3a9053bbeb 100644 > --- a/drivers/net/can/flexcan.c > +++ b/drivers/net/can/flexcan.c > @@ -530,7 +530,7 @@ static int flexcan_chip_unfreeze(struct flexcan_priv > *priv) > priv->write(reg, ®s->mcr); > > while (timeout-- && (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK)) > - udelay(10); > + udelay(20); > > if (priv->read(®s->mcr) & FLEXCAN_MCR_FRZ_ACK) > return -ETIMEDOUT; > Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
