Erspan protocol (version 1 and 2) relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
erspan_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \
key 1 seq erspan_ver 1
$ip link set erspan1 up
$ip -d link sh erspan1
erspan1@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state
UNKNOWN mode DEFAULT
link/ether 52:aa:99:95:9a:b5 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68
maxmtu 1500
erspan remote 192.168.0.2 local 192.168.0.1 ttl inherit ikey 0.0.0.1 iseq
oseq erspan_index 0
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ipgre_fill_info
Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianc...@redhat.com>
---
net/ipv4/ip_gre.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 20a64fe6254b..3978f807fa8b 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -1455,12 +1455,17 @@ static int ipgre_fill_info(struct sk_buff *skb, const
struct net_device *dev)
{
struct ip_tunnel *t = netdev_priv(dev);
struct ip_tunnel_parm *p = &t->parms;
+ __be16 o_flags = p->o_flags;
+
+ if ((t->erspan_ver == 1 || t->erspan_ver == 2) &&
+ !t->collect_md)
+ o_flags |= TUNNEL_KEY;
if (nla_put_u32(skb, IFLA_GRE_LINK, p->link) ||
nla_put_be16(skb, IFLA_GRE_IFLAGS,
gre_tnl_flags_to_gre_flags(p->i_flags)) ||
nla_put_be16(skb, IFLA_GRE_OFLAGS,
- gre_tnl_flags_to_gre_flags(p->o_flags)) ||
+ gre_tnl_flags_to_gre_flags(o_flags)) ||
nla_put_be32(skb, IFLA_GRE_IKEY, p->i_key) ||
nla_put_be32(skb, IFLA_GRE_OKEY, p->o_key) ||
nla_put_in_addr(skb, IFLA_GRE_LOCAL, p->iph.saddr) ||
--
2.20.1
