Without this patch sfp code retries to read the full struct sfp_eeprom_id
id out of the SFP eeprom. Sizeof(id) is 96 bytes.
My i2c hardware, Mediatek mt7621, has a rx buffer of 64 bytes.
So sfp_read gets -NOSUPPORTED back on his turn return -EAGAIN.
Same issue is with the SFP_EXT_STATUS data which is 92 bytes.
By split-up the request in multiple smaller requests with a max size of i2c
max_read_len, we can readout the SFP module successfully.
Tested with MT7621 and two Fiberstore modules SFP-GB-GE-T and SFP-GE-BX.
Signed-off-by: René van Dorst <opensou...@vdorst.com>
---
drivers/net/phy/sfp.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index fd8bb998ae52..1352a19571cd 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -367,7 +367,28 @@ static void sfp_set_state(struct sfp *sfp, unsigned int
state)
static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
{
- return sfp->read(sfp, a2, addr, buf, len);
+ const struct i2c_adapter_quirks *q = sfp->i2c->quirks;
+ int ret;
+ size_t rx_bytes = 0;
+
+ /* Many i2c hw have limited rx buffers, split-up request when needed. */
+ while ((q->max_read_len) && (len > q->max_read_len)) {
+ ret = sfp->read(sfp, a2, addr, buf, q->max_read_len);
+ if (ret < 0)
+ return ret;
+ rx_bytes += ret;
+ addr += q->max_read_len;
+ buf += q->max_read_len;
+ len -= q->max_read_len;
+ }
+
+ ret = sfp->read(sfp, a2, addr, buf, len);
+ if (ret < 0)
+ return ret;
+
+ rx_bytes += ret;
+
+ return rx_bytes;
}
static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
--
2.19.1
