On 09.01.2019 08:20, Frank Wunderlich wrote:
> From: Heiner Kallweit <hkallwe...@gmail.com>
>
> linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup:
>
> [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548
> phy_start_aneg+0x110/0x144
> [ 5.178826] called from state READY
> ....
> [ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>]
> (mtk_init+0x414/0x47c)
> [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800
> [ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>]
> (register_netdevice+0x98/0x51c)
> [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800
> [ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>]
> (register_netdev+0x2c/0x44)
> [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800
> [ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>]
> (mtk_probe+0x668/0x7ac)
> [ 5.314336] r5:dea2e604 r4:dea2e040
> [ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>]
> (platform_drv_probe+0x58/0xa8)
> [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac
> r5:00000000
> [ 5.333445] r4:deacea10
> [ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>]
> (really_probe+0x2d8/0x424)
>
> maybe other boards using this generic driver are affected
>
> v2:
> optimization:
>
> - phy_set_max_speed() is only needed if you want to reduce the
> max speed, typically if the PHY supports 1Gbps but the MAC
> supports 100Mbps only.
>
> - The pause parameters are autonegotiated. Except you have a specific
> need you normally don't need to manually fiddle with this.
>
> - phy_start_aneg() is called implicitly by the phylib state machine,
> you shouldn't call it manually except you have a good excuse.
>
> - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't
> needed. It's done by phy_link_change() in phylib.
>
> Signed-off-by: Frank Wunderlich <fran...@public-files.de>
> ---
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 ----------------
> 1 file changed, 16 deletions(-)
>
Reviewed-by: Heiner Kallweit <hkallwe...@gmail.com>
