In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"),
AVE controller affects this modification because the controller forces
to ignore lower 2bits of buffer start address, and make 2-byte headroom,
that is, data reception starts from (buffer + 2).

This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value,
and replaces NET_IP_ALIGN with it.

Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
 drivers/net/ethernet/socionext/sni_ave.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c 
b/drivers/net/ethernet/socionext/sni_ave.c
index 598b963..6710151 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -194,6 +194,7 @@
 
 /* Parameter for ethernet frame */
 #define AVE_MAX_ETHFRAME       1518
+#define AVE_FRAME_HEADROOM     2
 
 /* Parameter for interrupt */
 #define AVE_INTM_COUNT         20
@@ -577,12 +578,13 @@ static int ave_rxdesc_prepare(struct net_device *ndev, 
int entry)
 
        skb = priv->rx.desc[entry].skbs;
        if (!skb) {
-               skb = netdev_alloc_skb_ip_align(ndev,
-                                               AVE_MAX_ETHFRAME);
+               skb = netdev_alloc_skb(ndev, AVE_MAX_ETHFRAME);
                if (!skb) {
                        netdev_err(ndev, "can't allocate skb for Rx\n");
                        return -ENOMEM;
                }
+               skb->data += AVE_FRAME_HEADROOM;
+               skb->tail += AVE_FRAME_HEADROOM;
        }
 
        /* set disable to cmdsts */
@@ -595,12 +597,12 @@ static int ave_rxdesc_prepare(struct net_device *ndev, 
int entry)
         * - Rx buffer begins with 2 byte headroom, and data will be put from
         *   (buffer + 2).
         * To satisfy this, specify the address to put back the buffer
-        * pointer advanced by NET_IP_ALIGN by netdev_alloc_skb_ip_align(),
-        * and expand the map size by NET_IP_ALIGN.
+        * pointer advanced by AVE_FRAME_HEADROOM, and expand the map size
+        * by AVE_FRAME_HEADROOM.
         */
        ret = ave_dma_map(ndev, &priv->rx.desc[entry],
-                         skb->data - NET_IP_ALIGN,
-                         AVE_MAX_ETHFRAME + NET_IP_ALIGN,
+                         skb->data - AVE_FRAME_HEADROOM,
+                         AVE_MAX_ETHFRAME + AVE_FRAME_HEADROOM,
                          DMA_FROM_DEVICE, &paddr);
        if (ret) {
                netdev_err(ndev, "can't map skb for Rx\n");
-- 
2.7.4

Reply via email to