On 12/3/18 11:44 AM, Steve Douthit wrote: > On 12/3/18 2:07 PM, Florian Fainelli wrote: >> On 12/3/18 10:55 AM, Steve Douthit wrote: >>> Most dsa devices expect a 'struct mii_bus' pointer to talk to switches >>> via the MII interface. >>> >>> While this works for dsa devices, it will not work safely with Linux >>> PHYs in all configurations since the firmware of the ixgbe device may >>> be polling some PHY addresses in the background. >>> >>> Signed-off-by: Stephen Douthit <steph...@silicom-usa.com> >>> --- >> >> [snip] >> >>> +/** >>> + * ixgbe_mii_bus_write - Write a clause 22/45 register >>> + * @hw: pointer to hardware structure >>> + * @addr: address >>> + * @regnum: register number >>> + * @regnum: valueto write >> >> This should be @val to match the function parameters > > OK > >>> + **/ >>> +static s32 ixgbe_mii_bus_write(struct mii_bus *bus, int addr, int regnum, >>> + u16 val) >>> +{ >>> + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)bus->priv; >> >> Nitpick: cast is not necessary since this is a void * pointer (for that >> reason). > > OK, I'll clean up this and other unnecessary casts. > > I forgot Andrew's suggestion to squash the swfw semaphore masks from: > > + u32 gssr = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; > + > + if (hw->bus.lan_id) > + gssr |= IXGBE_GSSR_PHY1_SM; > + else > + gssr |= IXGBE_GSSR_PHY0_SM; > > to > > + u32 gssr = hw->phy.phy_semaphore_mask; > + gssr |= IXGBE_GSSR_TOKEN_SM | IXGBE_GSSR_PHY0_SM; > > Is it ok to collect both of your 'Reviewed-by:'s with that additional > change for v4?
I'd think so. -- Florian