On Thursday 02 November 2006 19:48, Larry Finger wrote:
> These patches modify the rt2x00-d80211 family of drivers to use
> the wireless statics added in patch 1.
>
> Signed-Off-By: Larry [EMAIL PROTECTED]>
I will put the search for the correct values on my TODO list,
but that needs some heavy legacy driver research.
But these values seem sane enough for me. ;)
Signed-Off-By: Ivo van Doorn <[EMAIL PROTECTED]>
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
> @@ -1695,6 +1695,14 @@ static void rt2400pci_rxdone(void *data)
> rt2x00dev->rx_params.ssi =
> rt2x00_get_field32(rxd->word2, RXD_W2_RSSI);
>
> +/* FIXME: The following set of assignments supply additional data for
> wireless statistics. The
> + necessary quantities are (1) the "noise" value in dBm, and (2) the
> "signal" value in dBm.
> + The present code supplies dummy values for these quantities. */
> +
> + rt2x00dev->rx_params.noise = -85; /* FIXME */
> + rt2x00dev->rx_params.signal =
> + rt2x00dev->rx_params.ssi - RT2X00_RX_MAX_SSI;
> /* FIXME */
> +
> __ieee80211_rx(ring->net_dev,
> skb, &rt2x00dev->rx_params);
> }
> @@ -2581,6 +2589,7 @@ static int rt2400pci_init_hw(struct rt2x
> hw->device_strips_mic = 0;
> hw->monitor_during_oper = 1;
> hw->fraglist = 0;
> + hw->maxssi = RT2X00_RX_MAX_SSI;
>
> /*
> * We have 2 TX queues: TX and PRIO.
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
> @@ -1841,6 +1841,14 @@ static void rt2500pci_rxdone(void *data)
> rt2x00dev->rx_params.ssi =
> rt2x00_get_field32(rxd->word2, RXD_W2_RSSI);
>
> +/* FIXME: The following set of assignments supply additional data for
> wireless statistics. The
> + necessary quantities are (1) the "noise" value in dBm, and (2) the
> "signal" value in dBm.
> + The present code supplies dummy values for these quantities. */
> +
> + rt2x00dev->rx_params.noise = -85; /* FIXME */
> + rt2x00dev->rx_params.signal =
> + rt2x00dev->rx_params.ssi - RT2X00_RX_MAX_SSI;
> /* FIXME */
> +
> __ieee80211_rx(ring->net_dev,
> skb, &rt2x00dev->rx_params);
>
> @@ -2735,6 +2743,7 @@ static int rt2500pci_init_hw(struct rt2x
> hw->device_strips_mic = 0;
> hw->monitor_during_oper = 1;
> hw->fraglist = 0;
> + hw->maxssi = RT2X00_RX_MAX_SSI;
>
> /*
> * We have 2 TX queues: TX and PRIO.
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
> @@ -1627,6 +1627,14 @@ static void rt2500usb_rxdone(void *data)
> rt2x00dev->rx_params.ssi =
> rt2x00_get_field32(rxd->word1, RXD_W1_RSSI);
>
> +/* FIXME: The following set of assignments supply additional data for
> wireless statistics. The
> + necessary quantities are (1) the "noise" value in dBm, and (2) the
> "signal" value in dBm.
> + The present code supplies dummy values for these quantities. */
> +
> + rt2x00dev->rx_params.noise = -85; /* FIXME */
> + rt2x00dev->rx_params.signal =
> + rt2x00dev->rx_params.ssi - RT2X00_RX_MAX_SSI;
> /* FIXME */
> +
> __ieee80211_rx(ring->net_dev,
> skb, &rt2x00dev->rx_params);
>
> @@ -2423,6 +2431,7 @@ static int rt2500usb_init_hw(struct rt2x
> hw->device_strips_mic = 0;
> hw->monitor_during_oper = 1;
> hw->fraglist = 0;
> + hw->maxssi = RT2X00_RX_MAX_SSI;
>
> /*
> * We have 2 TX queues: TX and PRIO.
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2x00.h
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2x00.h
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2x00.h
> @@ -850,6 +850,8 @@ struct rt2x00_dev {
> #define CONFIG_DOUBLE_ANTENNA 0x00010000
> #define CONFIG_DISABLE_BBP_TUNING 0x00020000
>
> +#define RT2X00_RX_MAX_SSI 100
> +
> /*
> * Chipset identification.
> */
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt61pci.c
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
> @@ -2285,6 +2285,14 @@ static void rt61pci_rxdone(void *data)
> rt2x00dev->rx_params.ssi =
> rt2x00_get_field32(rxd->word1, RXD_W1_RSSI);
>
> +/* FIXME: The following set of assignments supply additional data for
> wireless statistics. The
> + necessary quantities are (1) the "noise" value in dBm, and (2) the
> "signal" value in dBm.
> + The present code supplies dummy values for these quantities. */
> +
> + rt2x00dev->rx_params.noise = -85; /* FIXME */
> + rt2x00dev->rx_params.signal =
> + rt2x00dev->rx_params.ssi - RT2X00_RX_MAX_SSI;
> /* FIXME */
> +
> __ieee80211_rx(ring->net_dev,
> skb, &rt2x00dev->rx_params);
>
> @@ -3255,6 +3263,7 @@ static int rt61pci_init_hw(struct rt2x00
> hw->device_strips_mic = 0;
> hw->monitor_during_oper = 1;
> hw->fraglist = 0;
> + hw->maxssi = RT2X00_RX_MAX_SSI;
>
> /*
> * We have full WMM capabilities.
> Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
> ===================================================================
> --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt73usb.c
> +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
> @@ -1917,6 +1917,14 @@ static void rt73usb_rxdone(void *data)
> rt2x00dev->rx_params.ssi =
> rt2x00_get_field32(rxd->word1, RXD_W1_RSSI);
>
> +/* FIXME: The following set of assignments supply additional data for
> wireless statistics. The
> + necessary quantities are (1) the "noise" value in dBm, and (2) the
> "signal" value in dBm.
> + The present code supplies dummy values for these quantities. */
> +
> + rt2x00dev->rx_params.noise = -85; /* FIXME */
> + rt2x00dev->rx_params.signal =
> + rt2x00dev->rx_params.ssi - RT2X00_RX_MAX_SSI;
> /* FIXME */
> +
> __ieee80211_rx(ring->net_dev,
> skb, &rt2x00dev->rx_params);
>
> @@ -2796,6 +2804,7 @@ static int rt73usb_init_hw(struct rt2x00
> hw->device_strips_mic = 0;
> hw->monitor_during_oper = 1;
> hw->fraglist = 0;
> + hw->maxssi = RT2X00_RX_MAX_SSI;
>
> /*
> * We have full WMM capabilities.
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Rt2400-devel mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/rt2400-devel
>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
