Dne středa 01 listopad 2006 23:00 Francois Romieu napsal(a): > Libor Klepáč <[EMAIL PROTECTED]> : > [...] > > > i have build computer with msi MS-7235 motherboard, it has r8169 chip > > onboard i'm using kernel version 2.6.18 from debian (and i also rebuild > > kernel without NAPI). > > When i modprobe module , dmesg says > > > > r8169 Gigabit Ethernet driver 2.2LK loaded > > PCI: Enabling device 0000:03:06.0 (0000 -> 0003) > > ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 201 > > r8169 0000:03:06.0: region #2 not an MMIO resource, aborting > > > > lspci says (there is no region 2? ) > > Please send lspci -vvx, I need the hexadecimal ID.
hello, here it comes
0000:03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169SC
Gigabit Ethernet (rev 10)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 235c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 0x10 (64
bytes)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at fd7fd000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fde20000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 67 81 07 00 b0 02 10 00 00 02 10 20 00 00
10: 01 cc 00 00 00 d0 7f fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 5c 23
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 20 40
libor
pgpJ53AxCGBy7.pgp
Description: PGP signature
