[PATCH 18/20] can: flexcan: handle tx-complete CAN frames via rx-offload infrastructure

[Marc Kleine-Budde]

From: Oleksij Rempel <o.rem...@pengutronix.de>

Current flexcan driver will put TX-ECHO in regular unsorted way, in
this case TX-ECHO can come after the response to the same TXed message.
In some cases, for example for J1939 stack, things will break.
This patch is using new rx-offload API to put the messages just in the
right place.

Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
Cc: linux-stable <sta...@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
 drivers/net/can/flexcan.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 68b46395c580..41a175f80c4b 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -787,8 +787,11 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 
        /* transmission complete interrupt */
        if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) {
+               u32 reg_ctrl = priv->read(&regs->mb[FLEXCAN_TX_MB].can_ctrl);
+
                handled = IRQ_HANDLED;
-               stats->tx_bytes += can_get_echo_skb(dev, 0);
+               stats->tx_bytes += can_rx_offload_get_echo_skb(&priv->offload,
+                                                              0, reg_ctrl << 
16);
                stats->tx_packets++;
                can_led_event(dev, CAN_LED_EVENT_TX);
 
-- 
2.19.1