After a recent change phy_id_mask value 0 means "exact match". This allows to remove setting phy_id_mask values from the driver configs.
Signed-off-by: Heiner Kallweit <[email protected]> --- drivers/net/phy/realtek.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 7b1c89b38..abff4cdc9 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -215,13 +215,11 @@ static struct phy_driver realtek_drvs[] = { { .phy_id = 0x00008201, .name = "RTL8201CP Ethernet", - .phy_id_mask = 0x0000ffff, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, }, { .phy_id = 0x001cc816, .name = "RTL8201F Fast Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_BASIC_FEATURES, .flags = PHY_HAS_INTERRUPT, .ack_interrupt = &rtl8201_ack_interrupt, @@ -233,7 +231,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc910, .name = "RTL8211 Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .config_aneg = rtl8211_config_aneg, .read_mmd = &genphy_read_mmd_unsupported, @@ -241,7 +238,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc912, .name = "RTL8211B Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .ack_interrupt = &rtl821x_ack_interrupt, @@ -253,7 +249,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc913, .name = "RTL8211C Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .config_init = rtl8211c_config_init, .read_mmd = &genphy_read_mmd_unsupported, @@ -261,7 +256,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc914, .name = "RTL8211DN Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .ack_interrupt = rtl821x_ack_interrupt, @@ -271,7 +265,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc915, .name = "RTL8211E Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .ack_interrupt = &rtl821x_ack_interrupt, @@ -281,7 +274,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc916, .name = "RTL8211F Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = &rtl8211f_config_init, @@ -294,7 +286,6 @@ static struct phy_driver realtek_drvs[] = { }, { .phy_id = 0x001cc961, .name = "RTL8366RB Gigabit Ethernet", - .phy_id_mask = 0x001fffff, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = &rtl8366rb_config_init, -- 2.19.1
