> -----Original Message----- > From: Miroslav Lichvar [mailto:[email protected]] > Sent: Friday, October 26, 2018 5:04 AM > To: Richard Cochran <[email protected]> > Cc: [email protected]; [email protected]; Keller, Jacob E > <[email protected]>; Thomas Gleixner <[email protected]> > Subject: Re: [PATCH] igb: shorten maximum PHC timecounter update interval > > On Fri, Oct 12, 2018 at 07:05:30AM -0700, Richard Cochran wrote: > > On Fri, Oct 12, 2018 at 01:13:39PM +0200, Miroslav Lichvar wrote: > > > Since commit 500462a9d ("timers: Switch to a non-cascading wheel"), > > > scheduling of delayed work seems to be less accurate and a requested > > > delay of 540 seconds may actually be longer than 550 seconds. Shorten > > > the delay to 480 seconds to be sure the timecounter is updated in time. > > > > Good catch. This timer wheel change will affect other, similar > > drivers. Guess I'll go through and adjust their timeouts, too. > > I just realized that we need to fit there also any frequency > adjustments of the PHC and system clock. The PHC can be set to run up > to 6% faster and the system clock can be slowed down by up to 10%. > > Those 480 seconds in the igb driver is not short enough for that. > Should I fix and resend this patch, or send a new one? > > Other drivers may have a similar problem. >
Hmm, good point. I'd send a v2 of this patch, unless it's already been applied to net or net-next. Thanks, Jake > -- > Miroslav Lichvar
