Hello,

On 22-10-2018 13:28, Andrew Lunn wrote:
>>  EXPORT_SYMBOL_GPL(gen10g_resume);
>> @@ -327,7 +381,7 @@ struct phy_driver genphy_10g_driver = {
>>      .phy_id         = 0xffffffff,
>>      .phy_id_mask    = 0xffffffff,
>>      .name           = "Generic 10G PHY",
>> -    .soft_reset     = gen10g_no_soft_reset,
>> +    .soft_reset     = gen10g_soft_reset,
>>      .config_init    = gen10g_config_init,
>>      .features       = 0,
>>      .aneg_done      = genphy_c45_aneg_done,
> Hi Jose
>
> You need to be careful here. There is a reason this is called
> gen10g_no_soft_reset, rather than having an empty
> gen10g_soft_reset. Some PHYs break when you do a reset.  So adding a
> gen10g_soft_reset is fine, but don't change this here, without first
> understanding the history, and talking to Russell King.

Hmm, the reset function only interacts with standard PCS
registers, which should always be available ...

>From my tests I need to do at least 1 reset during power-up so in
ultimate case I can add a feature quirk or similar.

Russell, can you please comment ?

Thanks and Best Regards,
Jose Miguel Abreu

>
>             Andrew

Reply via email to