Without a valid of_node in struct device we can't find the mvpp2 port
device by its DT node. Specifically, this breaks
of_find_net_device_by_node().
For example, the Armada 8040 based Clearfog GT-8K uses Marvell 88E6141
switch connected to the &cp1_eth2 port:
&cp1_mdio {
...
switch0: switch0@4 {
compatible = "marvell,mv88e6085";
...
ports {
...
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&cp1_eth2>;
};
};
};
};
Without this patch, dsa_register_switch() returns -EPROBE_DEFER because
of_find_net_device_by_node() can't find the device_node of the &cp1_eth2
device.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
---
v2: Expand the commit log as suggested by Andrew
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 32d785b616e1..28500417843e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4803,6 +4803,7 @@ static int mvpp2_port_probe(struct platform_device *pdev,
dev->min_mtu = ETH_MIN_MTU;
/* 9704 == 9728 - 20 and rounding to 8 */
dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
+ dev->dev.of_node = port_node;
/* Phylink isn't used w/ ACPI as of now */
if (port_node) {
--
2.18.0
