Hi Dave,
This patch (1/2) seems to have fallen through the cracks. The other
one (2/2), you already picked.
Thanks
On Mon, Apr 16, 2018 at 1:08 PM <jassisinghb...@gmail.com> wrote:
>
> From: Jassi Brar <jaswinder.si...@linaro.org>
>
> Enable TX-irq as well during ndo_open() as we can not count upon
> RX to arrive early enough to trigger the napi. This patch is critical
> for installation over network.
>
> Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
> Signed-off-by: Jassi Brar <jaswinder.si...@linaro.org>
> ---
> drivers/net/ethernet/socionext/netsec.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/socionext/netsec.c
> b/drivers/net/ethernet/socionext/netsec.c
> index f4c0b02..f6fe70e 100644
> --- a/drivers/net/ethernet/socionext/netsec.c
> +++ b/drivers/net/ethernet/socionext/netsec.c
> @@ -1313,8 +1313,8 @@ static int netsec_netdev_open(struct net_device *ndev)
> napi_enable(&priv->napi);
> netif_start_queue(ndev);
>
> - /* Enable RX intr. */
> - netsec_write(priv, NETSEC_REG_INTEN_SET, NETSEC_IRQ_RX);
> + /* Enable TX+RX intr. */
> + netsec_write(priv, NETSEC_REG_INTEN_SET, NETSEC_IRQ_RX |
> NETSEC_IRQ_TX);
>
> return 0;
> err3:
> --
> 2.7.4
>
