Add a new character 'f' which can be used to configure an Ethernet
controller to support Wake-on-LAN using filters programmed with the
ethtool::rxnfc and the special action -2 (wake-up filter). This is
useful in particular in the context of devices that must support wake-up
on more complex patterns such as multicast DNS packets.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
ethtool.8.in | 4 +++-
ethtool.c | 5 +++++
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/ethtool.8.in b/ethtool.8.in
index 0a366aa536ae..97c7330fd373 100644
--- a/ethtool.8.in
+++ b/ethtool.8.in
@@ -58,7 +58,7 @@
.\"
.\" \(*WO - wol flags
.\"
-.ds WO \fBp\fP|\fBu\fP|\fBm\fP|\fBb\fP|\fBa\fP|\fBg\fP|\fBs\fP|\fBd\fP...
+.ds WO \fBp\fP|\fBu\fP|\fBm\fP|\fBb\fP|\fBa\fP|\fBg\fP|\fBs\fP|\fBf|\fBd\fP...
.\"
.\" \(*FL - flow type values
.\"
@@ -679,6 +679,7 @@ b Wake on broadcast messages
a Wake on ARP
g Wake on MagicPacket\[tm]
s Enable SecureOn\[tm] password for MagicPacket\[tm]
+f Wake on filter(s)
d T{
Disable (wake on nothing). This option clears all previous options.
T}
@@ -870,6 +871,7 @@ Specifies the Rx queue to send packets to, or some other
action.
nokeep;
lB l.
-1 Drop the matched flow
+-2 Use the matched flow as a Wake-on-LAN filter
0 or higher Rx queue to route the flow
.TE
.TP
diff --git a/ethtool.c b/ethtool.c
index fb93ae898312..aa2bbe9e4c65 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -931,6 +931,9 @@ static int parse_wolopts(char *optstr, u32 *data)
case 's':
*data |= WAKE_MAGICSECURE;
break;
+ case 'f':
+ *data |= WAKE_FILTER;
+ break;
case 'd':
*data = 0;
break;
@@ -964,6 +967,8 @@ static char *unparse_wolopts(int wolopts)
*p++ = 'g';
if (wolopts & WAKE_MAGICSECURE)
*p++ = 's';
+ if (wolopts & WAKE_FILTER)
+ *p++ = 'f';
} else {
*p = 'd';
}
--
2.17.1
