On Fri, Aug 03, 2018 at 04:50:27PM +0100, Jose Abreu wrote: > Adds the documentation for XGMAC2 DT bindings. > > Signed-off-by: Jose Abreu <[email protected]> > Cc: David S. Miller <[email protected]> > Cc: Joao Pinto <[email protected]> > Cc: Giuseppe Cavallaro <[email protected]> > Cc: Alexandre Torgue <[email protected]> > Cc: Sergei Shtylyov <[email protected]> > Cc: [email protected] > Cc: Rob Herring <[email protected]> > --- > Changes from v1: > - Correct header, now we also support 2.5/10G. > - Add missing '>' (Sergei) > --- > Documentation/devicetree/bindings/net/stmmac.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/stmmac.txt > b/Documentation/devicetree/bindings/net/stmmac.txt > index 3a28a5d8857d..a32fd590ce8f 100644 > --- a/Documentation/devicetree/bindings/net/stmmac.txt > +++ b/Documentation/devicetree/bindings/net/stmmac.txt > @@ -1,7 +1,8 @@ > -* STMicroelectronics 10/100/1000 Ethernet driver (GMAC) > +* STMicroelectronics 10/100/1000/2500/10000 Ethernet driver (GMAC/XGMAC)
Bindings don't describe drivers. > > Required properties: > -- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" > +- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" or > + "snps,dwxgmac-<ip_version>", "snps,dwxgmac". > For backwards compatibility: "st,spear600-gmac" is also supported. > - reg: Address and length of the register set for the device > - interrupt-parent: Should be the phandle for the interrupt controller > -- > 2.7.4 > >
