gre_multipath test was using egress vlan_id matching on flows, for the
purpose of collecting next-hops statistics, later to be compared
against configured weights.
As matching on vlan_id on egress direction is not supported on all HW
devices, change the match criteria to use destination IP.
Signed-off-by: Nir Dotan <n...@mellanox.com>
Acked-by: Petr Machata <pe...@mellanox.com>
---
tools/testing/selftests/net/forwarding/gre_multipath.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh
b/tools/testing/selftests/net/forwarding/gre_multipath.sh
index 3b1e047..cca2baa 100755
--- a/tools/testing/selftests/net/forwarding/gre_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -95,10 +95,10 @@ sw1_create()
nexthop dev g1b
tc qdisc add dev $ul1 clsact
- tc filter add dev $ul1 egress pref 111 prot 802.1q \
- flower vlan_id 111 action pass
- tc filter add dev $ul1 egress pref 222 prot 802.1q \
- flower vlan_id 222 action pass
+ tc filter add dev $ul1 egress pref 111 prot ipv4 \
+ flower dst_ip 192.0.2.66 action pass
+ tc filter add dev $ul1 egress pref 222 prot ipv4 \
+ flower dst_ip 192.0.2.82 action pass
}
sw1_destroy()
--
2.8.4
