Hi David, John, This is technically a v2, but this patch series builds on your feedback and defines the following:
- a new WAKE_* bit: WAKE_FILTER which can be enabled alongside other type of Wake-on-LAN to support waking up on a programmed filter (match + action) - a new RX_CLS_FLOW_WAKE flow action which can be specified by an user when inserting a flow using ethtool::rxnfc, similar to the existing RX_CLS_FLOW_DISC The bcm_sf2 and bcmsysport drivers are updated accordingly to work in concert to allow matching packets at the switch level, identified by their filter location to be used as a match by the SYSTEM PORT (CPU/management controller) during Wake-on-LAN. Let me know if this looks better than the previous incarnation of the patch series. Attached is also the ethtool patch that I would be submitting once the uapi changes are committed. Thank you! Florian Fainelli (3): ethtool: Add WAKE_FILTER and RX_CLS_FLOW_WAKE net: dsa: bcm_sf2: Propagate ethtool::rxnfc to CPU port net: systemport: Add support for WAKE_FILTER drivers/net/dsa/bcm_sf2_cfp.c | 40 ++++- drivers/net/ethernet/broadcom/bcmsysport.c | 193 ++++++++++++++++++++- drivers/net/ethernet/broadcom/bcmsysport.h | 11 +- include/uapi/linux/ethtool.h | 5 +- 4 files changed, 236 insertions(+), 13 deletions(-) -- 2.17.1
