On Sun, 5 Aug 2018, Andrew Lunn wrote:
> On Sat, Aug 04, 2018 at 07:06:58AM -0400, Robert P. J. Day wrote:
> >
> > i'll try to keep this (relatively) short as there may be a
> > simple answer to this, or it could just be a stupid question --
> > sort of related to previous question (thank you, florian).
> >
> > currently messing with networking device involving FPGA and some
> > quad-port transceivers, and noticed that, when one unplugs or
> > plugs a device into one of the ports, there is no change in the
> > contents of the corresponding sysfs files
> > /sys/class/net/<ifname>/carrier (or operstate, for that matter,
> > which might be related to this as well).
>
> Hi Robert
>
> As other have pointed out, ndo_change_carrier is not what you want
> here.
i think i see that now ... based on the really adamant comment in
netdevice.h:
"Devices that determine carrier state from physical hardware
properties (eg network cables) or protocol-dependent mechanisms (eg
USB_CDC_NOTIFY_NETWORK_CONNECTION) should NOT implement this
function."
the impression i got was that implementing that routine for a physical
device would actually cause problems, but it seems only that it would
be a strange thing to do, but wouldn't necessarily cause problems if
you chose not to take advantage of it. which brings me back to one of
my original questions -- why *would* someone implement it? as some
sort of debugging feature? in any event, i'm convinced that that's not
where the problem lies.
> You should have a PHY device of some sort. Either a traditional
> copper PHY, or an SFP module. There should be a driver for this PHY.
> This could be one of those in drivers/net/phy. Or it could be
> firmware running, running on a little microcontroller inside your
> FPGA?
in my case, it's properly in drivers/net/phy, so at least that part
is normal. back to investigating ...
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca/dokuwiki
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
