On Tue, Jul 17, 2018 at 08:36:37AM -0700, Florian Fainelli wrote:
> Hi all,
>
> This patch series adds support for allowing Wake-on-LAN to wake-up the
> system using configurable filters. This is particular useful in the context
> of Android where wake on MDNS is a requirement.
>
> We support this by using the bcm_sf2 Compact Field Processor (CFP) which
> supports matching packets and tagging them with an unique identifier
> (Classification ID) that is added in each packet being matched through the use
> of Broadcom tags. The SYSTEMPORT MAC attached to that switch is then used to
> match that unique identifier and trigger a system wake-up event.
>
> Last patch is the ethtool modifications to support that feature.
>
> Example:
>
> ethtool --config-nfc gphy flow-type udp4 src-ip 192.168.1.1 dst-ip
> 192.168.1.32 \
> src-port 1234 dst-port 5678 action 64
> Added rule with ID 1
Hi Florian
What is action 64?
> ethtool -s gphy wol f filters 0x2
What does this 0x2 represent?
These magic numbers are not so nice.
Andrew
