On Fri, May 11, 2018 at 01:08:19PM -0500, Dan Murphy wrote: > Add support for the DP83811 phy. > > The DP83811 supports both rgmii and sgmii interfaces. > There are 2 part numbers for this the DP83TC811R does not > reliably support the SGMII interface but the DP83TC811S will. > > There is not a way to differentiate these parts from the > hardware or register set. So this is controlled via the DT > to indicate which phy mode is required. Or the part can be > strapped to a certain interface. > > Data sheet can be found here: > http://www.ti.com/product/DP83TC811S-Q1/description > http://www.ti.com/product/DP83TC811R-Q1/description > > Signed-off-by: Dan Murphy <dmur...@ti.com>
Hi Dan It is normal to add any Reviewed-by, or Tested-by: tags you received, so long as you don't make major changes. Andrew