> eg20t_mac@2,0,1 {
> compatible = "pci8086,8802";
> reg = <0x00020100 0 0 0 0>;
> - phy-reset-gpios = <&eg20t_gpio 6
> - GPIO_ACTIVE_LOW>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
It is generally a good idea to put an 'mdio' container which the PHYs
are on. You then pass this container node to of_mdiobus_register().
> +
> + ethernet-phy@0 {
> + compatible =
> "ethernet-phy-id001c.c915";
> + reg = <0>;
> + reset-gpios = <&eg20t_gpio 6
> GPIO_ACTIVE_LOW>;
> + reset-assert-us = <25000>;
> + reset-deassert-us = <25000>;
> + };
Andrew
