From: Fabio Estevam <fabio.este...@nxp.com>
If the example binding is used on a real dts file, the following DTC
warning is seen with W=1:
arch/arm/boot/dts/imx6q-b450v3.dtb: Warning (avoid_unnecessary_addr_size):
/mdio-gpio/switch@0: unnecessary #address-cells/#size-cells without "ranges" or
child "reg" property
Remove unnecessary #address-cells/#size-cells to improve the binding
document examples.
Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
---
Documentation/devicetree/bindings/net/dsa/dsa.txt | 6 ------
1 file changed, 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt
b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index cfe8f64..3ceeb8d 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -82,8 +82,6 @@ linked into one DSA cluster.
switch0: switch0@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 0>;
@@ -135,8 +133,6 @@ linked into one DSA cluster.
switch1: switch1@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 1>;
@@ -204,8 +200,6 @@ linked into one DSA cluster.
switch2: switch2@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
dsa,member = <0 2>;
--
2.7.4
