Hi Rob,
On 04/25/2018 05:09 PM, Rob Herring wrote:
On Tue, Apr 24, 2018 at 10:01 AM, Christophe Roullier
<christophe.roull...@st.com> wrote:
Add ethernet pins on stm32mp157c.
Signed-off-by: Christophe Roullier <christophe.roull...@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 46 +++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 6f044100..86720a5 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -158,6 +158,52 @@
bias-disable;
};
};
+
+ ethernet0_rgmii_pins_a: rgmii@0 {
A unit-address without 'reg' property is not valid, so drop the '@0'.
Thanks for the highlights. We could replace rgmii@0 by rgmii-0.
If no objections, I will send a series to update all STM32 device tree
files (MCUs legacy). I will take care about it for future STM32 DT review.
Thanks
Alex
Please build your dtb with W=1 or W=12 which will tell you this and
other errors.
Rob
