From: Jassi Brar <jaswinder.si...@linaro.org>

Enable TX-irq as well during ndo_open() as we can not count upon
RX to arrive early enough to trigger the napi. This patch is critical
for installation over network.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Jassi Brar <jaswinder.si...@linaro.org>
---
 drivers/net/ethernet/socionext/netsec.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c 
b/drivers/net/ethernet/socionext/netsec.c
index f4c0b02..f6fe70e 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1313,8 +1313,8 @@ static int netsec_netdev_open(struct net_device *ndev)
        napi_enable(&priv->napi);
        netif_start_queue(ndev);
 
-       /* Enable RX intr. */
-       netsec_write(priv, NETSEC_REG_INTEN_SET, NETSEC_IRQ_RX);
+       /* Enable TX+RX intr. */
+       netsec_write(priv, NETSEC_REG_INTEN_SET, NETSEC_IRQ_RX | NETSEC_IRQ_TX);
 
        return 0;
 err3:
-- 
2.7.4

Reply via email to